Skip to contentSkip to footer

Skagit County

Plumbers in Skagit County, WA

Licensed plumbing and HVAC across Skagit County, from a crew based in Monroe.
A Beaver's Plumbing van parked in front of a craftsman home as a technician walks up to the door

Beaver's Plumbing is based in Monroe, about 48 miles from Mount Vernon and farther from Anacortes and the upper Skagit valley, so Skagit County visits are scheduled around drive time. Call to confirm an arrival window for your address; emergency response times vary with distance.

Skagit County's median home was built in 1986: 22% of homes date from before 1960, 42% from before 1980, and 27% from 2000 or later (Census ACS 2020 to 2024).

Key facts

Serving
All of Skagit County
From our shop
About 48 driving miles from Monroe
Water
Skagit PUD and the City of Anacortes, plus small water systems and private wells. Soft on both main systems: 21 mg/L (Skagit PUD) and about 30 mg/L (Anacortes) in 2025 reports; PUD well systems range from 19.6 to 109 mg/L
Estimates
Free, upfront flat-rate pricing
Emergencies
24/7 at (425) 845-3535

Plumbing across Skagit County

Two big utilities anchor the county's water supply. Skagit PUD's Judy Reservoir system serves more than 116,000 people, mostly around Mount Vernon, Burlington and Sedro-Woolley, with soft water (21 mg/L) and no added fluoride. The City of Anacortes treats Skagit River water for Anacortes, La Conner, the Swinomish Tribal Community and Oak Harbor, and its 2025 report calls that water soft too, typically around 30 mg/L. The PUD also runs six small well systems from Guemes Island to Marblemount.

Groundwater varies. Skagit PUD treats several of its small well systems, including Alger and Cedargrove, to remove iron and manganese, and their hardness ranges from 19.6 mg/L on Guemes Island to 109 mg/L at Rockport. Guemes Island's aquifer is an EPA-designated sole source aquifer with documented seawater intrusion. Septic systems must be inspected every year, or every three years for a conventional gravity system, under county code 12.05.160 and state rules.

The Skagit valley floor is subject to flooding and relies on dikes. On December 10, 2025, the county told everyone in the 100-year floodplain to evacuate, and the river went on to crest at a record 37.73 feet at Mount Vernon. Housing runs older than in Snohomish County: 42% of Skagit homes were built before 1980, compared with 35% there, and 22% before 1960.

Communities we serve

Mount Vernon Burlington Anacortes Sedro-Woolley La Conner Conway Big Lake Bay View Alger Concrete

Near Skagit River, Deception Pass Bridge, Mount Erie, and everywhere in between.

Local know-how

Plumbing in Skagit County: what to know.

Test and treat well water

Some Skagit groundwater carries iron and manganese; Skagit PUD filters both out at small systems like Alger and Cedargrove. If your private well stains fixtures or tastes metallic, get it tested, and have us check the pressure tank, water heater and supply lines.

Flood-ready water heaters and furnaces

Much of the valley floor lies in the 100-year floodplain. Keep water heaters, furnaces and heat pumps above flood level, test sump pumps each fall, and consider a backwater valve on the sewer line. We can raise equipment when we replace it.

Older homes, older pipes

With 42% of Skagit County homes built before 1980, galvanized supply pipe and cast-iron drains may still be in service in many older houses. Rust-colored water, low pressure and slow drains are signs. We camera-inspect drains and quote repiping at a flat rate.

Water running right now?

Shut off the main water valve, turn off the water heater, and call us. Our emergency line answers 24/7.

Call (425) 845-3535

Services

Our services in Skagit County.

  • 01Plumbing

    Drain Cleaning

    Slow sinks, backed-up showers and main-line clogs cleared with professional cable machines and hydro-jetting, with a camera inspection when we need to see what's causing it.

    • — Kitchen, bathroom, laundry and floor drains cleared
    • — Main sewer line cleaning from the cleanout
    • — Hydro-jetting to scour grease, scale and roots off the pipe walls

    Typical price: $250–$550 for a standard drain cleaning

    Learn more
  • 02Plumbing

    Water Heater Repair & Installation

    Tank and tankless, gas and electric: same-day repairs, code-compliant replacements and upgrades, with the unit sized to your household.

    • — Diagnosis and repair of thermostats, elements, gas valves, igniters and leaks
    • — Tank water heater replacement, same day when possible
    • — Tankless water heater installation and upgrades

    Typical price: $2,200–$4,000 for a replacement, depending on the unit

    Learn more
  • 03Plumbing

    Leak Detection & Repair

    Leaks found with electronic detection instead of guesswork, then fixed for good: pipes, fittings, valves, fixtures, slabs and burst lines.

    • — Leak detection behind walls, under floors and in slabs
    • — Pipe, fitting and valve repairs (copper, PEX, galvanized, CPVC)
    • — Burst and frozen pipe repair

    Typical price: $500–$1,100 for most leak repairs

    Learn more
  • 04Plumbing

    Whole-Home Repiping

    Aging galvanized or polybutylene supply lines replaced with PEX or copper, with small access openings, a pressure test and a written warranty.

    • — Whole-home PEX or copper repipe
    • — Galvanized steel and polybutylene replacement
    • — New shutoff valves at fixtures
    Learn more
  • 05Plumbing

    Sewer Line Service & Repair

    Main sewer lines camera-inspected, cleaned of roots and grease, and repaired or replaced when the pipe itself has failed.

    • — Sewer camera inspection with the footage explained
    • — Main line cleaning and root cutting
    • — Hydro-jetting for grease and root buildup
    Learn more
  • 06Heating & cooling

    HVAC Repair & Installation

    Furnaces, heat pumps, air conditioners and ductless mini-splits repaired, maintained and installed, plus duct cleaning and repair.

    • — Furnace repair, maintenance and replacement
    • — Heat pump repair and installation
    • — Air conditioner service and installation
    Learn more

Also available in Skagit County: faucet, toilet and fixture installation, 24/7 emergency plumbing, and the Dam Good Defenders Club membership.

  • Upfront, written flat-rate price before any work begins
  • Dam Good Guarantee: if something we fixed isn't right, we come back and make it right, no charge.
  • WA contractor license BEAVEPI741J3

Good questions

Skagit County plumbing FAQ.

Don't see your question? Call or text (425) 845-3535. A real person answers, 24/7.

Is Skagit County water hard?

Not on the big systems. In their 2025 reports, Skagit PUD's Judy Reservoir water measured 21 mg/L and Anacortes's Skagit River water typically runs around 30 mg/L, both soft. Small well systems vary: the PUD's range from 19.6 mg/L on Guemes Island to 109 mg/L at Rockport. Private wells differ from one property to the next, so test yours.

How often do I need a septic inspection in Skagit County?

Every year for most systems, or every three years for a conventional gravity system. That is Skagit County Code 12.05.160 and state rule WAC 246-272A-0270. An inspection also shows whether the tank needs pumping, which usually costs more than the inspection itself, so regular inspections help you pump only when the tank actually needs it.

Plumbing problem in Skagit County? Let's fix it right.

Free estimates, upfront flat-rate pricing, and a 24/7 emergency line at (425) 845-3535.

Call TextFree estimate